HOW TO INSTALL A NEW TOILET FROM HOME DEPOT: A STEP-BY-STEP GUIDE
How to Install a New Toilet from Home Depot: A Step-by-Step GuideA toilet is an essential fixture in any bathroom, but sometimes it needs to be replaced. Whether you have a leaky toilet or simply want to upgrade to a newer model, installing a new toilet may seem like a daunting task. However, with the right tools and a little bit of patience, you can install a new toilet from Home Depot yourself. In this guide, we will take you through the steps for installing a new toilet from start to finish.First, you will need to gather some supplies that you will need for the installation. These supplies include a new toilet, a closet flange, a wax ring, a mounting kit, a level, a sponge, and a wrench. Be sure to read the instructions that came with your new toilet to see if it requires any additional supplies.Step 1: Remove the Old ToiletBefore installing the new toilet, you will need to remove the old toilet. To do this, turn off the water supply to the toilet and flush it to empty the tank and bowl. Use a scoop or bucket to remove any remaining water in the bowl and tank. Loosen the nuts that secure the toilet to the floor with a wrench and lift the toilet straight up and off the bolts. Remove the old wax ring from the flange and clean the toilet flange thoroughly.Step 2: Install the Closet FlangeThe closet flange connects the toilet to the drainpipe and should be securely fastened to the floor. To install the closet flange, insert a closet flange into the drainpipe and attach it to the floor with screws. Be sure to use a level to ensure that the flange is level.Step 3: Install the Wax RingThe wax ring seals the toilet to the closet flange and prevents any leakage. To install the wax ring, place it over the flange with the wider side down. Then, carefully lower the toilet onto the wax ring making sure that the bolts protrude through the holes in the base of the toilet and align with the holes in the closet flange.Step 4: Secure the ToiletOnce you have lowered the toilet onto the wax ring, attach the nuts to the bolts and hand tighten them. Then, use a wrench to tighten them a little bit more. Be careful not to over-tighten as this could crack the porcelain. Use a level to ensure that the toilet is level and stable.Step 5: Attach the Tank to the ToiletIf your new toilet comes with a separate tank, you will need to attach it to the toilet bowl. To do this, attach the rubber gasket to the bottom of the tank and lower it onto the bowl. Secure the tank to the bowl with the nuts and bolts provided and hand tighten them.Step 6: Connect the Water SupplyThe final step in installing a new toilet is to connect the water supply to the toilet tank. Screw in the water supply hose and turn on the water supply valve. Wait for the tank to fill and check for any leaks.ConclusionInstalling a new toilet may seem like a daunting task at first, but with the right tools and a little bit of patience, it can be done. Follow the steps in this guide to install a new toilet from Home Depot and enjoy a leak-free and functional bathroom fixture. Don’t forget to read the instructions that came with your new toilet for any additional information or requirements. See you again in another interesting article.
Related video of HOW TO INSTALL A NEW TOILET FROM HOME DEPOT: A STEP-BY-STEP GUIDE
